Ingots
Ingots for further forging and machining
according to international EN / ASTM standards
Ingots from 3 to 15 tons Austenitic
Stainless Steel, Duplex, Super Duplex,
and Nickel-based Super Alloys
We suggest using: as a primary blank for forging and processing
Order
Ingots from 3 to 15 tons Austenitic
Stainless Steel, Duplex, Super Duplex,
and Nickel-based Super Alloys
We suggest using: as a primary blank for forging and processing
OrderBlanks
Billets according to standards and individual technical
requirements (EN / ASTM standards)
OD min/max. (mm): 150-700
Length min. (mm): 1000
Length max. (mm): 6500
Weight min/max. (kg): 250-9000
Used in pipe manufacturing, flanges, rings, drives and shafts.
Order
OD min/max. (mm): 500-2000
ID min/max. (mm): 300-1800
Thickness (h) min/max. (mm): 100-850
Weight min/max. (kg): 250-8500
Used in gearboxes, bearings and large-sized joints.
Order
Thickness (h) min/max. (mm): 100-650
Width (a) min/max. (mm): 100-650
Length min (mm): 1000-3500
Length max (mm): 1000-6500
Weight min/max. (kg): 250-9000
It is used in reinforcement, building structures and transport equipment.
Order
OD min/max. (mm): 300-2000
Height (h) min/max. (mm): 120-750
Weight min/max. (kg): 250-8500
Used in flanges, supporting elements and mechanical engineering.
Order
Not sure about choosing a steel grade?
Our specialists will select the optimal solution taking into account
loads, operating environment and standards.
Vintage assortment
We offer a wide selection of steels and alloys, grouped by purpose and chemical composition.
Steel grade | CIS Standards GOST, TU | EU Standards EN 10083, EN 10084, EN 10028-2 | USA Standards ASTM/AISI | |
09X17H 14X17H2 09X17H | GOST 5949-75 TU 14-1-377-72 | |||
20X17H2 | GOST 5949-75 | 1.4057 | 431 | |
15X12BHMФ | GOST 5949-75 GOST 18968-73 | |||
20X12BHMФ | ||||
18X11MНФВ | ||||
12X18Н9T | GOST 5949-75 | 1.4878 | X12CrNiTi 8-9 | 321 |
12X18Н10T | TU 14-1-377-72 | 1.4541 | X6CrNiTi 8-10 | 321 |
12X18Н12T | GOST 5949-75 | X10CrNiTi 8-10 | ||
08-12X18H9 08X18H10T-У | GOST 5949-75 | 1.4301 1.4307 | X5CrNi 18-10 X8CrNiS 18-9 | 301 303 |
03-08X18H10 02X18H11 | GOST 5949-75 | |||
08X18H12Б | GOST 5949-75 | 1.4301 1.4307 | X5CrNi 18-10 | 304/304L (H) |
08X22H6Т 08X21H6М2Т 03X22H6 | 1.4550 | X6CrNiNb 18-10 | 347 | |
10X17H13М2Т | 1.4362 | S32304 | ||
10X17H13М3Т | 1.4571 | X6CrNiMoTi 7-12-2 | 316Ti | |
08X17H15М3Т | ||||
03X17H14М3 | 1.4573 | X10CrNiMoTi 18-12 | 316Ti | |
03X17H12M2 | 1.4401 1.4404 1.4406 | 316/316L (H) 316LN | ||
1.4818 | X6CrNiSiNCe 19-10 | S30415 | ||
20X20H14C2 | GOST 5949-75 | 1.4828 | X15CrNiSi 20-12 | 309Si |
1.4835 | X9CrNiSiNCe 21-11-2 | S30815 | ||
10-20X23H18 | GOST 5949-75 | 1.4845 | X8CrNi 25-21 | 310(S) |
Steel grade | CIS Standards GOST, TU | EU Standards DIN EN 10088, DIN EN 10272 | USA Standards ASTM/AISI | |
08X13 | GOST 5949-75 | 1.4000 | X6Cr13 | 410S |
12X13 | GOST 18968-73 | 1.4006 | X12Cr13 | 410 |
20X13 | TU 14-1-377-72 | 1.4021 | X20Cr13 | 420 |
30X13 | TU 5949-75 TU | 1.4028 | X30Cr13 | |
40X13 | 14-1-377-72 | 1.4031 | X39Cr13 | |
08X17 | GOST 5949-75 | 1.4016 | X6Cr17 | 430 |
12X17 | 1.4016 | X6Cr17 | 430 | |
08X17T | 1.4510 | X3CrTi17 | 430Ti | |
Steel grade | CIS Standards GOST, TU | EU Standards DIN EN 10095 | USA Standards ASTM/AISI | |
XH78T (ЭИ435) | GOST 5949-75 TU 14-1-1671-76 | |||
XH75МБТЮ (ЭИ602) | GOST 5949-75 | |||
2.4816 | NiСr15Fe | N06600 (Alloy 600) | ||
XH32T (ЭИ670) | GOST 5949-75 | 1.4876 | X10NiCrAITi 32-21 | N08800 (Alloy 800) |
2.4858 | NiСr21Mo | N08825 (Alloy 825) | ||
06XH28МДТ (ЭИ943, ЭП516) | GOST 5949-75 TU 14-1-2214-77 TU 14-1-2134-77 | |||
XH60BT | GOST 5949-75 TU 14-1-230-72 TU 14-1-286-98 TU 14-1-1530-75 TU 14-1-1531-75 TUU 27.1-00190414-038:07 | |||
CIS Standards GOST 1050-88 (DSTU 7809-15) | EU Standards EN 10250-2 | USA Standards ASTM/AISI | |
20 | 1.0402 | C22 | 1020 |
35 | 1.0501 | C35 | 1035 |
45 | 1.0503 | C45 | 1045 |
60 | 1.0601 | C60 | 1060 |
Titanum | |
ВТ 1-0, ВТ 5, ВТ 6, ВТ 8, ВТ 20, ВТ 22, ВТ 23, ОТ 4-1, ВТ 3-1, Т110, NT 7-14, ПТ-1М, ПТ-7М, ПТ-3B, BТ-14, 3M | Grade 1, Grade 2, Grade 5, Grade 6, Grade 9 |
CIS Standards GOST 14959-79 | EU Standards EN 10083, EN 10084 | USA Standards ASTM/AISI | |
50ХГ | 1.7176 | 55Cr3 | 5155 |
50ГФА | 1.8159 | 50CrV4 | 6145 |
50ХФА | 1.8159 | 50CrV4 | 6150 |
65 | 1.1230 | C65S1 | 1065 |
65Г | 1.1230 | 66Mn4 | 1066 |
70 | 1.1231 | 2CS67 | 1069 |
70Г | 80Мп4 | 1570 | |
CIS Standards GOST 4543-71 (DSTU 7806) | EU Standards EN 10083, EN 10084 | USA Standards ASTM/AISI | |
15X | 1.7015 | 15Cr3 | 5015 |
30X | 1.7030 | 28Cr4 | 5130 |
35X | 1.7033 | 34Cr4 | 5132 |
40X | 1.7045 | 42Cr4 | 5140 |
15Г | 1.1148 | C16E | |
20Г | 1.0460 | C22.8 | 1022 |
25Г | 1026 | ||
30Г | 1.1170 | 28Mn6 | 1330 |
35Г | 1035 | ||
40Г | 1.1157 | 40Mn4 | 1039 |
45Г | 1.0503 | C45 | 1045 |
50Г | 1.1206 | C50 | 1050 |
10Г2 | 1513 | ||
30Г2 | 1.1165 | 28Mn6 | 1132 |
35Г2 | 1.1167 | 35Mn5 | 1137 |
40Г2 | 1141 | ||
45Г2 | 46Mn27 | 1144 | |
50Г2 | 1.0913 | 50Mn7 | 1552 |
33ХС | |||
38ХС | |||
40ХС | |||
15ХМ | 1.7337 | 16CrMo4-4 | |
20ХМ | 1.7320 | 20MoCr3 | 4118 |
25ХМ | 1.7218 | 25CrMo4 | 4130 |
30ХМ | 1.7218 | 25CrMo4 | 4130 |
35ХМ | 1.7220 | 34CrMo4 | 4135, 4137 |
38ХМ | 1.7225 | 41CrMo4 | |
30ХМА | |||
30ХЗМФ | 1.8519 | 31CrMoV9 | |
40ХМФА | |||
15ХФ | |||
40ХФА | 1.7223 | 41CrMo4 | 6117 |
12ХH | 4140, 4142 | ||
20ХH | 18NiCrMo5 | 3120 | |
40ХH | 1.5711 | 40NiCr6 | 3140 |
45ХH | 3145 | ||
50ХH | |||
CIS Standards GOST 4543-71 (DSTU 7806-15) | EU Standards EN 10083, EN 10084, EN 10028-2 | USA Standards ASTM/AISI | |
12XH3A | 1.5732 | HNiCr10 | 665М13 |
14XH3M | 1.6657 | 14NiCrMo 13-4 | 9310 |
20XH3A | 20NC11 | ||
30XH3A | 1.5755 | 30NC11 | |
12X2H4A | 1.5752 | 14NiCr14 | Е3310 |
20X2H4A | 19CrNi8 | Е3310 | |
38X2H2MA | 1.6582 | 34CrNiMo6 | 4330 |
40XH2MA | 1.6511 | 36CrNiMo4 | 4340 |
40X2H2MA | 1.6565 | 40CrNiMo6 | 4340 |
38XH3MA | |||
18X2H4MA | 1.6657 | UNiCrMo 134 | |
25X2H4MA | |||
36X2H2MФA | 34CrNiMo6 | 4340 | |
38XH3MФA | 34NiCrMo V14-5 | ||
30XH2MФA | |||
45XH2MФA | |||
СIS Standards OST 108.958.04-85 | |||
34XH1MA | |||
34XH3MA | |||
СIS Standards OST 108.030.113-87 | |||
15Х1М1Ф | |||
СIS Standards GOST 20072 - 74 | 1.7362 | X12CrMo5 | 501, 502 |
15Х5M | |||
20Х3МBФ | |||
CIS Standards GOST 5950-00 | EU Standards DIN EN 10088, DIN EN 10272 | USA Standards ASTM/AISI | |
Х | 1.2067 | 10Cr6 | L1 |
ХФ | 1.2210 | 115CrV3 | |
ХВГ | 1.2419 | 105WCr6 | O1 |
ХГС | 100CrMn6 | ||
4X5МФС | 1.2343 | X37CrMoV5-1 | H11 |
4X4ВМФС | X30WCrV5-3 | H12 | |
4X5МФ1С | 1.2344 | X40CrMoV5-1 | H13 |
5XHM | 1.2711 | 55NiCrMov7-7 | L6 |
9ХФ | 1.2235 | 80CrV2 | L3 |
9Х1 | 102Cr6 | ||
9ХС | 150Cr14 | ||
We have been cooperating with LLC “DNEPROPRESS STEEL” since 2016. During the entire period of cooperation, there have been no complaints.
- high-quality, certified products;
- taking into account the wishes of the Customer;
- timely delivery;
- prompt resolution of issues;
- qualified specialists.
Our 1st order was in 2014, then there was a break. During this time, the company has formed as an enterprise that meets European standards. Prompt response and consultations of technologists help in working on the European market. Thank you for your cooperation.
“We are satisfied with the cooperation with the manufacturing plant. We ordered finished products from stainless steel grades of various configurations. Each order is approached with special attention. Competent support from production to shipment with all necessary documentation. We will cooperate in the future.”
“A customer testimonial that highlights features and answers potential customer doubts about your product or service. Showcase testimonials from a similar demographic to your customers.”
The minimum allowable outer diameter of the product is determined according to the ranges given on the Production page.
The maximum allowable outer diameter of the product is determined according to the standard size table on the Production page.
The minimum product height is set according to the technical capabilities of the equipment and is indicated on the Production page.
The maximum length of the product is determined by the parameter table and can be increased by using a transport blank up to 5 m long.
The minimum allowable internal diameter of the product is determined according to the technical capabilities table on the Production page.
The maximum allowable internal diameter of the product is determined according to the parameter table on the Production page.
Dnepropress Steel is a leading manufacturer of high-quality metallurgical products that has been successfully operating on the market for eight years. The company specializes in supplying products for the nuclear, aviation, chemical, automotive and energy industries, gaining the trust of customers both in Ukraine and abroad. Thanks to modern technologies and high production capacities, Dnepropress Steel ensures that its products meet the highest quality standards.
Dnepropress Steel is a certified supplier for a number of leading Ukrainian companies, such as CENTRAVIS PRODUCTION UKRAINE, NNEGC Energoatom, KCKBA, MOTOR SICH and Metinvest Holding. In addition, DPS products are successfully exported to European markets, in particular to ABRS Group SA, Merseyside Metal Services Ltd, Steel Service Krefeld GmbH and others. Such a wide geography of supplies indicates the high quality and competitiveness of Dnepropress Steel products.
DPS provides a full production cycle, starting with metal smelting in open arc and induction furnaces and ending with the processing of finished products. Thanks to the use of modern equipment for forging, turning and grinding, Dnepropress Steel achieves the required accuracy and quality in products. The plant is capable of processing up to 10,000 tons of metal per year with the possibility of increasing productivity to 50,000 tons.
The product range of Dnepropress Steel includes corrosion-resistant steels, austenitic and austenitic-ferritic steels, as well as duplex steels. The sizes of the blanks vary from 200 to 600 mm in diameter and from 3000 to 5000 mm in length. The products are manufactured in accordance with the technical documentation of customers with the possibility of adapting the chemical composition of the metal to special requirements.
The quality of Dnepropress Steel products is confirmed by the certification of the management system according to the ISO 9001:2015 standard. DPS’s own laboratory performs a wide range of research, including chemical analysis, mechanical testing, corrosion resistance testing, and control of the micro- and macrostructure of the metal. This guarantees consistently high quality even for the most demanding customers.
Dnepropress Steel stands out among its competitors with its individual approach to each client, a full production cycle, and high flexibility of cooperation terms. The company is ready to fulfill orders of any complexity, ensuring speed and quality of implementation. Extensive production facilities allow it to serve both large-scale projects and the needs of small businesses.
The company’s main target audience includes large enterprises, small businesses, and international partners. Dnepropress Steel offers individual solutions that meet the most stringent requirements of customers and ensure their production needs.
DPS invites everyone who values quality, reliability, and a professional approach to cooperate. Thanks to modern technologies and proven production processes, Dnepropress Steel guarantees products that meet the highest world standards. Choose Dnepropetrovsk Steel – provide a reliable foundation for your successful operations and production needs.
